NAFT SAZEH QESHM
    Offshore & Onshore EPCI Contractor

NSQ benefits from four modern shops for executing of its projects. These shops, with concrete floors, have a total covered area of 2400 m² and an open area for material storage, (which mainly contains the profile machines) and sub assembly areas which are equipped with overhead cranes. Also these areas are equipped with piping product lines and can be active round-the-clock.


STRUCTURAL FABRICATION SHOPS

PIPE COATING SERVICES

The Pipe Coating yard occupies an area of over 25,000 m² on which approximately 5,500 m² is covered.


The covered area includes the following cases:


Site Laboratory Offices 430 m²

Spare parts store 500 m²

Cement Store 1170 m²

Pipe coating wrapping 3060 m²

Clients offices 130 m²

Electrical powerhouse 210 m²

COAL TAR ENAMEL PLANT

This plant include feed skids, conveyors, Grit Blasting Chamber, Primer Applying unit, Coating and Wrapping unit, discharge conveyors and skids.


Pipe size capacity 114 mm to 1218 mm(4 to 48 inch)

Production rate 1.2-6.0 KM/ day

CONCRETE WEIGHT COATING PLANT

This plant consists of cement silos, aggregate hopper and conveyor, pug mill mixer, slinger drum unit, wire spools unit and a pipe carriage system which is completed with variable speed drives, rollers and a reclamation system.


Pipe size capacity 114 mm to 1219 mm(4 to 48 inch)

Production rate 50 tones /hour

Concrete thickness 25 mm to 80 mm

MACHINE SHOP (PLATE CUTTING & ROLLING SHOPS)

These shops have an area of 4,800 m², with concrete covered floors including:


NSQ’s fabrication yard is one of the most modern yards in the Middle East with an area of 28.5 hectares and with a total production capacity of 48,000 tons of fabrication steel structures and piping / oil gas equipment annually.


Structural fabrication capacity (approximately 2,000-3,000 tons/month)

Piping / oil and gas equipment fabrication capacity (approximately 1,000 tons /month)


Fabrication yard can efficiently deploy a production work force (fabricators, fitters, welders and their helpers) up to 1,400 men and support productive work force (riggers, scaffolders and crane operators) up to 200 men and staff up to 100 men.

Fabrication Yard

back

Yard Areas

The fabrication yard is divided to various areas with the below details:

Fabrication / assembly area

136700

Storage area (covered)

1100

Open storage area

9100

Pipe coating area

69000

Sand blasting and painting area

10000

Plant sections / workshops   

9500

Offices

4000

Accommodation area

29000

Others (muster point, green field, …)

16600

Load-out Facilities

Load-out facilities include are included the followings:


Corrugated steel sheet pile quay wall with an approximate length of 370 m

The area of load-out in  three lines: